Printing the Paper Copy

From APL
Revision as of 17:08, 7 February 2019 by Aplstudent (talk | contribs)

Jump to: navigation, search

Negative or Positive, Mirrored or Not Mirrored

We need to determine if the paper copy should be the negative (color inverted) or positive (color not inverted) of the layer's digital image. The PCB process leaves copper in the unexposed areas so we ultimately want the film to be the positive of our digital layer. Although, the conversion from paper to film results in the film with the negative of the paper. Thus, we want to print a negative image on paper so the film will show the positive.

We also want to make sure that when we expose the top and bottom layers everything lines up. This means we need to print the the top layers as regular images and the bottom layers as mirrored images.

Creating Files to Print

To create a SVG (Scalable Vector Graphic) of a schematic in KiCad open Pcbnew and select File -> Export SVG. Next, select the front copper layer (F.Cu) or back copper layer (B.Cu). If you are converting the front copper layer do not mirror the image, but if you are printing the back copper layer, select "Print mirrored". Once you've chosen a location to save the files (the "Output Directory") select plot for each layer with the appropriate settings.

Now, with your SVG files saved somewhere accessible we'll want to create negatives of the images. Unfortunately, printing a PNG or SVG of a negative can be surprisingly troublesome. The main issue is that a PNG or SVG contains black, white, and transparent regions and the transparent areas, which print as white, will not turn black when creating a negative image. The fix is to print the PNG or SVG on top of a black rectangle the size of your PCB. To do this we'll use a program like photoshop, GIMP, or Inkscape to create two digital layers, one top layer with the PCB schematic and one bottom layer with a black rectangle.

(Both GIMP and Inkscape can be found on the "Hank" computer in the APL or downloaded for free, in this tutorial we'll use Inkscape)

Open Inkscape and select File -> Open..., find your SVG images and select "Open". Once you're schematic is loaded we'll want to add the SVG images to a layer. First create a blank layer by selecting Layer -> Add Layer.. then click Add. Now, use the mouse tool to click and drag a selection box around you're schematic. Once you have everything in your schematic selected right click somewhere in the selection box and click "Move to layer ...". Select the layer you just created and click "Move". This will enable you to create a second layer below your schematic layer and draw a black background. Now, create a new layer the same way we created the first layer but in the popup menu select "Position: Below current". Open the Layers... meun by pressing Shift+Ctrl+L and select your first layer (the one with your schematic). Next click Extensions -> Color -> Negative to create a negative image. You'll notice that most of the detail in your schematic disappears. To get this detail back, select your second layer and use the "Create rectangles and squares" tool (make sure black is selected from the row of colors at the bottom of the screen) to draw a large black rectangle around you circuit. To avoid wasting ink don't fill the entire page with the black rectangle, just fill the area of the page that contains the PCB schematic. When you're finished if everything went correctly the areas of the board we want to be copper should be white and everything else should be black

Create paper art

The UO copy center adjacent to the craft center in the basement of the EMU (adjacent to EMU falling skies) accepts high-resolution B&W images in png format. They have a delivery time of a few minutes and a cost of ten cents for a B&W page printed at high resolution onto fine surface photo paper.